From Wiki-UX.info

Wiki-UX / Auto Port Aggregation / HP APA Lan Monitor with ServiceGuard
Jump to: navigation, search

HP APA Lan Monitor with ServiceGuard

Abstract

This article explains to detect configuration limitations of Auto Port Aggregation Aggreated Trunk and Lan Monitor (failover) features on a ServiceGuard A.11.17 and A.11.18 cluster.

Contents


Incorrect Lan Monitor configuration

APA Configuration

NODE_NAME                       wphvp4763
 
POLLING_INTERVAL                10000000
DEAD_COUNT                      3
 
LM_RAPID_ARP                    off
LM_RAPID_ARP_INTERVAL           1000000
LM_RAPID_ARP_COUNT              10
 
FAILOVER_GROUP          lan900                    <--- Lan Monitor APA
        STATIONARY_IP   10.91.56.164
        PRIMARY         lan2    5 
        STANDBY         lan4    3

Cluster configuration

CLUSTER_NAME            ach
 
NODE_NAME               wphvp4649
  NETWORK_INTERFACE     lan0
    HEARTBEAT_IP        192.192.192.2
  NETWORK_INTERFACE     lan900
    HEARTBEAT_IP        10.91.56.163
 
FIRST_CLUSTER_LOCK_PV           /dev/dsk/c3t3d0
 
NODE_NAME               wphvp4763
  NETWORK_INTERFACE     lan0
    HEARTBEAT_IP        192.192.192.1
  NETWORK_INTERFACE     lan900
    HEARTBEAT_IP        10.91.56.164              <--- Lan Monitor APA used as Heartbeat is not supported!!!
 
FIRST_CLUSTER_LOCK_PV           /dev/dsk/c3t3d0
 
HEARTBEAT_INTERVAL              1000000
NODE_TIMEOUT            2000000
 
AUTO_START_TIMEOUT      600000000
NETWORK_POLLING_INTERVAL        2000000
 
NETWORK_FAILURE_DETECTION               INOUT
 
MAX_CONFIGURED_PACKAGES         150
 
VOLUME_GROUP            /dev/vg_lock

Reference

Authors

This page was last modified on 29 July 2010, at 03:42. This page has been accessed 2,456 times.