From Wiki-UX.info

Wiki-UX / Integrity Virtual Machines / How to provision networking to Integrity VM Guests
Jump to: navigation, search

How to provision networking to Integrity VM Guests

Abstract

This article is a sort of Quick Reference Sheet to add virtual network to an Integrity VM guest.

WORK IN PROGRESS!!!

Contents


Procedure

  1. Use hpvmnet command to create the virtual switch (vswitch) associated to the pNIC on the APA trunk, if not already done.
  2. Use hpvmnet command to boot the vswitch.
  3. Use hpvmmodify command to add the vNIC resource to the HPVM guest using the vswitch.
  4. Configure the new vNIC on the HPVM guest using standard HP-UX network configuration files and commands.

Example

# hpvmnet -c -S <vswitch-name> -n <nic-id>
# hpvmnet -S <vswitch-name> -b
# hpvmnet -v
# hpvmmodify -P <guest> -a network:lan::vswitch:<vswitch-name>

Section 3

Reference

Authors

This page was last modified on 28 July 2010, at 04:23. This page has been accessed 2,295 times.