How to recover a system from an Ignite-UX boot tape
From Wiki-UX.info
Contents
Interrupt system boot
Interrupt the system boot and boot from the Ignite make_tape_recovery tape. Use sea ipl to select the P2 "Sequential access media" (P2 in this example).
Firmware Version 45.44 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2004, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 800 MHz Active Functional 67108864 67108864 1 800 MHz Idle Functional 67108864 67108864 Central Bus Speed (in MHz) : 200 Available Memory : 2097152 KB Good Memory Required : Not initialized. Defaults to 32 MB. Primary boot path: 0/1/1/0.1 Alternate boot path: 0/1/1/1.13 Console path: 0/0/1/1.0 Keyboard path: 0/0/4/0.0 Processor is booting from the first available device. To discontinue, press any key within 10 seconds. Boot terminated. ---- Main Menu --------------------------------------------------------------- Command Description ------- ----------- BOot [PRI|ALT|<path>] Boot from specified path PAth [PRI|ALT] [<path>] Display or modify a path SEArch [DIsplay|IPL] [<path>] Search for boot devices COnfiguration menu Displays or sets boot values INformation menu Displays hardware information SERvice menu Displays service commands DIsplay Redisplay the current menu HElp [<menu>|<command>] Display help for menu or command RESET Restart the system ---- Main Menu: Enter command or menu > sea ipl Searching for device(s) with bootable media ... This may take several minutes. To discontinue search, press any key (termination may not be immediate). Path Number Device Path (dec) Device Type and Utilities ----------- ----------------- ------------------------- P0 0/1/1/0.1 Random access media IPL P1 0/1/1/1.13 Random access media IPL P2 0/1/1/0.2 Sequential access media IPL P3 0/1/2/0 LAN Module Main Menu: bo P2 alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3e900000. gate64: sysvec_vaddr = 0xc0002000 for 2 pages NOTICE: nfs3_link(): File system was registered at index 4. NOTICE: autofs_link(): File system was registered at index 6. NOTICE: cachefs_link(): File system was registered at index 7. System Console is on the Built-In Serial Interface iether0: INITIALIZING HP AB352-60001 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/1/2/0 iether1: INITIALIZING HP AB352-60001 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/1/2/1 igelan2: INITIALIZING HP A9784-60002 PCI/PCI-X 1000Base-T FC/GigE Combo Adapter at hardware path 0/4/1/0/6/0 Swap device table: (start & size given in 512-byte blocks) entry 0 - auto-configured on root device; ignored - no room WARNING: no swap device configured, so dump cannot be defaulted to primary swap. WARNING: No dump devices are configured. Dump is disabled. Starting the STREAMS daemons-phase 1 Create STCP device files Starting the STREAMS daemons-phase 2 $Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $ Memory Information: physical page size = 4096 bytes, logical page size = 4096 bytes Physical: 2095104 Kbytes, lockable: 1536928 Kbytes, available: 1788036 Kbytes * Preparing to execute init... ======= 05/09/08 19:41:35 EDT HP-UX Installation Initialization. (Fri May 09 19:41:35 EDT 2008) @(#)Ignite-UX Revision C.7.5.142 @(#)ignite/launch (opt) Revision: /branches/IUX_RA0803/ignite/src@72866 Last Modified: 2008-02-06 15:49:50 -0700 (Wed, 06 Feb 2008) * Configuring RAM filesystems... * Scanning system for IO devices... * Boot device is: 0/1/2/0 * Setting keyboard language.
Use Ignite-UX interface
Use the Ignite-UX itool interface to properly configure system network configuration and to verify in which boot drive will the HP-UX be installed.
[ Welcome to Ignite-UX! ] Use the <tab> key to navigate between fields, and the arrow keys within fields. Use the <return/enter> key to select an item. Use the <return/enter> or <space-bar> to pop-up a choices list. If the menus are not clear, select the "Help" item for more information. Hardware Summary: System Model: 9000/800/rp4440 +----------------------+---------------+--------------------+[ Scan Again ] | Disks: 6 ( 203.5GB)| Floppies: 0 | LAN cards: 3 | | CD/DVDs: 1 | Tapes: 0 | Memory: 2046Mb | | Graphics Ports: 0 | IO Buses: 7 | CPUs: 2 |[ H/W Details ] +----------------------+---------------+--------------------+ [ Install HP-UX ] [ Run an Expert Recovery Shell ] [ Advanced Options ] [ Reboot ] [ Help ]
[ User Interface and Media Options ] This screen lets you pick from options that will determine if an Ignite-UX server is used, and your user interface preference. User Interface Options: [ ] Guided Installation (very basic installs - deprecated mode) [ * ] Advanced Installation (recommended for disk and filesystem management) [ ] No user interface - setup basic networking, use defaults and go [ ] Remote graphical interface running on the Ignite-UX server Hint: If you need to make LVM size changes, or want to set the final networking parameters during the install, you will need to use the Advanced mode (or remote graphical interface). [ OK ] [ Cancel ] [ Help ]
[ LAN Interface Selection ] More than one network interface was detected on the system. You will need to select the interface to enable. Only one interface can be enabled, and it must be the one connected to the network that can be used in contacting the install and/or SD servers. Use the <tab> and/or arrow keys to move to the desired LAN device to enable, then press <Return>. HW Path Interface Station Address Description ---------------------------------------------------------- [ 0/1/2/0 lan0 0x00156004A2FA HP_AB352-60001_PCI/PCI-X_1000B ] [ 0/1/2/1 lan1 0x00156004A2FB HP_AB352-60001_PCI/PCI-X_1000B ] [ 0/4/1/0/6/0 lan2 0x0016353E5012 HP_A9784-60002_PCI/PCI-X_1000B ]
Interrupt DHCP network configuration with [Ctrl]+[C] and provided manually the system network configuration.
[ NETWORK CONFIGURATION ] This system's hostname: delta Internet protocol address (eg. 15.2.56.1) of this host: 16.90.48.75 Default gateway routing internet protocol address: 16.90.48.1 The subnet mask (eg. 255.255.248.0 or 0xfffff800): 255.255.252.0 IP address of the Ignite-UX server system: 16.90.48.69 Is this networking information only temporary? [ No ] [ OK ] [ Cancel ] [ Help ]
┌ /opt/ignite/bin/itool () ┐ │ │ │ ┌───────┐┌──────────┐┌────────┐┌─────────────┐┌──────────┐ │ │ │ Basic ││ Software ││ System ││ File System ││ Advanced │ │ │ │ \───────────────────────────────────────────────────────────────────┐│ │ │ ││ │ │ Configurations: [ HP-UX B.11.11 archive ->] [ Description... ] ││ │ │ ││ │ │ Environments: [ English HP-UX 11.11 MC0 - ->] (HP-UX B.11.11) ││ │ │ ││ │ │ [ Root Disk ] HP_36.4GST336754LC, 0/1/1/1.0.0, 34732 M> ││ │ │ ││ │ │ File System: [ Logical Volume Manager (LVM) with VxFS ->] ││ │ │ ││ │ │ [ Root Swap (MB)... ] 2048 Physical Memory (RAM) = 2046 MB ││ │ │ ││ │ │ [ Languages... ] English [ Keyboards... ] [ Additional... ]││ │ │ ││ │ └───────────────────────────────────────────────────────────────────────────┘│ │ [ Show Summary... ] [ Reset Configuration ] │ │──────────────────────────────────────────────────────────────────────────────│ │ [ Go! ] [ Cancel ] [ Help ] │ └──────────────────────────────────────────────────────────────────────────────┘
Use [ Go ! ] buttom
When all the settings has been checked, use the GO buttom in start "igniting" the server.
- Note: The server will automatically reboot after recovering the archive. It will reboot a second time after rebuilding the device special files.
* Loading configuration utility... * Beginning installation from source: 16.90.48.69 ======= 05/09/08 19:50:44 EDT Starting system configuration... * Configure_Disks: Begin * Will install B.11.11 onto this system. * Creating LVM physical volume "/dev/rdsk/c3t0d0" (0/1/1/1.0.0). * Creating volume group "vg00". * Creating logical volume "vg00/lvol1" (/stand). * Creating logical volume "vg00/lvol2" (swap_dump). * Creating logical volume "vg00/lvol3" (/). * Creating logical volume "vg00/lvol4" (/tmp). * Creating logical volume "vg00/lvol5" (/home). * Creating logical volume "vg00/lvol6" (/opt). * Creating logical volume "vg00/lvol7" (/usr). * Creating logical volume "vg00/lvol8" (/var). * Extending logical volume "vg00/lvol1" (/stand). * Extending logical volume "vg00/lvol2" (swap_dump). * Extending logical volume "vg00/lvol3" (/). * Extending logical volume "vg00/lvol4" (/tmp). * Extending logical volume "vg00/lvol5" (/home). * Extending logical volume "vg00/lvol6" (/opt). * Extending logical volume "vg00/lvol7" (/usr). * Extending logical volume "vg00/lvol8" (/var). * Making HFS filesystem for "/stand", (/dev/vg00/rlvol1). * Making VxFS filesystem for "/", (/dev/vg00/rlvol3). * Making VxFS filesystem for "/tmp", (/dev/vg00/rlvol4). * Making VxFS filesystem for "/home", (/dev/vg00/rlvol5). * Making VxFS filesystem for "/opt", (/dev/vg00/rlvol6). * Making VxFS filesystem for "/usr", (/dev/vg00/rlvol7). * Making VxFS filesystem for "/var", (/dev/vg00/rlvol8). * Configure_Disks: Complete * Download_mini-system: Begin x ./sbin/fs/hfs/mkfs, 290816 bytes, 568 tape blocks x ./sbin/fs/hfs/newfs, 212992 bytes, 416 tape blocks x ./sbin/fs/vxfs/mkfs, 393216 bytes, 768 tape blocks x ./sbin/fs/vxfs/newfs, 327680 bytes, 640 tape blocks x ./sbin/mkfs symbolic link to /sbin/fs_wrapper x ./sbin/newfs symbolic link to /sbin/fs_wrapper x ./sbin/lib/mfsconfig.d/hfs, 978 bytes, 2 tape blocks x ./sbin/lib/mfsconfig.d/vxfs, 966 bytes, 2 tape blocks x ./sbin/fs_wrapper, 233472 bytes, 456 tape blocks x ./sbin/sh, 401408 bytes, 784 tape blocks x ./usr/sbin/tunefs, 20480 bytes, 40 tape blocks x ./sbin/extendfs symbolic link to /sbin/fs_wrapper x ./sbin/fs/vxfs/extendfs, 319488 bytes, 624 tape blocks x ./sbin/fs/hfs/extendfs, 245760 bytes, 480 tape blocks x ./sbin/lvchange, 831488 bytes, 1624 tape blocks ./sbin/lvcreate linked to ./sbin/lvchange ./sbin/lvdisplay linked to ./sbin/lvchange ./sbin/lvextend linked to ./sbin/lvchange ./sbin/lvlnboot linked to ./sbin/lvchange ./sbin/lvreduce linked to ./sbin/lvchange ./sbin/lvremove linked to ./sbin/lvchange ./sbin/lvrmboot linked to ./sbin/lvchange ./sbin/pvchange linked to ./sbin/lvchange ./sbin/pvcreate linked to ./sbin/lvchange ./sbin/pvdisplay linked to ./sbin/lvchange ./sbin/pvmove linked to ./sbin/lvchange ./sbin/vgcfgbackup linked to ./sbin/lvchange ./sbin/vgcfgrestore linked to ./sbin/lvchange ./sbin/vgchange linked to ./sbin/lvchange ./sbin/vgcreate linked to ./sbin/lvchange ./sbin/vgdisplay linked to ./sbin/lvchange ./sbin/vgexport linked to ./sbin/lvchange ./sbin/vgextend linked to ./sbin/lvchange ./sbin/vgimport linked to ./sbin/lvchange ./sbin/vgreduce linked to ./sbin/lvchange ./sbin/vgremove linked to ./sbin/lvchange ./sbin/vgscan linked to ./sbin/lvchange ./sbin/pvck linked to ./sbin/lvchange x ./usr/bin/lifcp, 36864 bytes, 72 tape blocks x ./usr/bin/lifls, 24576 bytes, 48 tape blocks x ./usr/bin/lifrm, 20480 bytes, 40 tape blocks x ./usr/bin/basename, 12288 bytes, 24 tape blocks x ./usr/bin/chgrp, 20480 bytes, 40 tape blocks x ./usr/bin/cmp, 20480 bytes, 40 tape blocks x ./usr/bin/cp, 28672 bytes, 56 tape blocks x ./usr/bin/cut, 20480 bytes, 40 tape blocks x ./usr/bin/dd, 24576 bytes, 48 tape blocks x ./usr/bin/dirname, 12288 bytes, 24 tape blocks x ./usr/bin/egrep, 24576 bytes, 48 tape blocks x ./usr/bin/expr, 20480 bytes, 40 tape blocks x ./usr/bin/false, 12288 bytes, 24 tape blocks ./usr/bin/fgrep linked to ./usr/bin/egrep x ./usr/bin/getopts, 163 bytes, 1 tape blocks ./usr/bin/grep linked to ./usr/bin/egrep x ./usr/bin/hostname, 12288 bytes, 24 tape blocks x ./usr/bin/kill, 16384 bytes, 32 tape blocks x ./usr/bin/ln, 16384 bytes, 32 tape blocks x ./usr/bin/model, 24576 bytes, 48 tape blocks x ./usr/bin/ps, 36864 bytes, 72 tape blocks x ./usr/bin/pwd, 12288 bytes, 24 tape blocks x ./usr/bin/rm, 28672 bytes, 56 tape blocks ./usr/bin/rmdir linked to ./usr/bin/rm x ./usr/bin/sed, 40960 bytes, 80 tape blocks x ./usr/bin/sort, 40960 bytes, 80 tape blocks x ./usr/bin/tar, 45056 bytes, 88 tape blocks x ./usr/bin/touch, 16384 bytes, 32 tape blocks x ./usr/bin/true, 12288 bytes, 24 tape blocks x ./usr/bin/uname, 16384 bytes, 32 tape blocks x ./usr/bin/wc, 16384 bytes, 32 tape blocks x ./usr/bin/compress, 28672 bytes, 56 tape blocks x ./usr/bin/ed, 57344 bytes, 112 tape blocks x ./usr/bin/find, 57344 bytes, 112 tape blocks x ./usr/bin/getopt, 12288 bytes, 24 tape blocks x ./usr/bin/id, 16384 bytes, 32 tape blocks x ./usr/bin/more, 65536 bytes, 128 tape blocks x ./usr/bin/tail, 20480 bytes, 40 tape blocks ./usr/bin/uncompress linked to ./usr/bin/compress ./usr/bin/zcat linked to ./usr/bin/compress x ./usr/bin/bdf, 20480 bytes, 40 tape blocks x ./usr/bin/diff, 36864 bytes, 72 tape blocks x ./usr/bin/mt, 16384 bytes, 32 tape blocks x ./usr/bin/ftp, 114688 bytes, 224 tape blocks x ./usr/bin/rcp, 45056 bytes, 88 tape blocks x ./usr/bin/remsh, 28672 bytes, 56 tape blocks x ./usr/bin/ex, 241664 bytes, 472 tape blocks ./usr/bin/vi linked to ./usr/bin/ex x ./usr/lib/uxbootlf, 707584 bytes, 1382 tape blocks x ./usr/lib/libHcurses.sl symbolic link to /usr/lib/libcurses.1 x ./usr/lib/libM.1 symbolic link to ./libm.1 x ./usr/lib/libc.1, 1515520 bytes, 2960 tape blocks x ./usr/lib/libc.2, 1359872 bytes, 2656 tape blocks x ./usr/lib/libcl.2, 987136 bytes, 1928 tape blocks x ./usr/lib/libcurses.1, 155648 bytes, 304 tape blocks x ./usr/lib/libdld.1, 12288 bytes, 24 tape blocks x ./usr/lib/libdld.2, 20480 bytes, 40 tape blocks x ./usr/lib/libdld.sl symbolic link to ./libdld.2 x ./usr/lib/libfab.1, 20480 bytes, 40 tape blocks x ./usr/lib/libfab.sl symbolic link to ./libfab.1 x ./usr/lib/libm.1, 98773 bytes, 193 tape blocks x ./usr/lib/libm.2, 184320 bytes, 360 tape blocks x ./usr/lib/libm.sl symbolic link to ./libm.2 x ./usr/lib/libnss_files.1, 36864 bytes, 72 tape blocks x ./usr/lib/libpthread.1, 106496 bytes, 208 tape blocks x ./usr/lib/libsec.2, 114688 bytes, 224 tape blocks x ./usr/lib/libstd_v2.2, 1511424 bytes, 2952 tape blocks x ./usr/lib/libxcurses.1, 315392 bytes, 616 tape blocks x ./usr/lib/nls/msg/C/dcerpc.cat, 13755 bytes, 27 tape blocks x ./usr/lib/nls/msg/C/cpp.cat, 10542 bytes, 21 tape blocks x ./usr/lib/libnsl.1, 602112 bytes, 1176 tape blocks x ./usr/lib/libnsl.sl symbolic link to /usr/lib/libnsl.1 x ./usr/lib/libnss_dns.1, 20480 bytes, 40 tape blocks x ./usr/lib/libxti.2, 110592 bytes, 216 tape blocks x ./usr/lib/sw/ui/C/smc_addhost.ui, 2571 bytes, 6 tape blocks x ./usr/lib/sw/ui/C/smc_analyze.ui, 4663 bytes, 10 tape blocks x ./usr/lib/sw/ui/C/smc_bundles.ui, 1775 bytes, 4 tape blocks x ./usr/lib/sw/ui/C/smc_chgloc.ui, 3634 bytes, 8 tape blocks x ./usr/lib/sw/ui/C/smc_defs.h, 24742 bytes, 49 tape blocks x ./usr/lib/sw/ui/C/smc_depend.ui, 2824 bytes, 6 tape blocks x ./usr/lib/sw/ui/C/smc_details.ui, 3990 bytes, 8 tape blocks x ./usr/lib/sw/ui/C/smc_dsa.ui, 8100 bytes, 16 tape blocks x ./usr/lib/sw/ui/C/smc_init.ui, 708 bytes, 2 tape blocks x ./usr/lib/sw/ui/C/smc_install.ui, 4018 bytes, 8 tape blocks x ./usr/lib/sw/ui/C/smc_jobopts.ui, 113847 bytes, 223 tape blocks x ./usr/lib/sw/ui/C/smc_jobs.ui, 20222 bytes, 40 tape blocks x ./usr/lib/sw/ui/C/smc_list.ui, 1962 bytes, 4 tape blocks x ./usr/lib/sw/ui/C/smc_menudefs.h, 1792 bytes, 4 tape blocks x ./usr/lib/sw/ui/C/smc_options.ui, 5889 bytes, 12 tape blocks x ./usr/lib/sw/ui/C/smc_patch.ui, 2527 bytes, 5 tape blocks x ./usr/lib/sw/ui/C/smc_remove.ui, 3289 bytes, 7 tape blocks x ./usr/lib/sw/ui/C/smc_rmsourc.ui, 2411 bytes, 5 tape blocks x ./usr/lib/sw/ui/C/smc_sched.ui, 4591 bytes, 9 tape blocks x ./usr/lib/sw/ui/C/smc_selalt.ui, 2804 bytes, 6 tape blocks x ./usr/lib/sw/ui/C/smc_seldpt.ui, 2404 bytes, 5 tape blocks x ./usr/lib/sw/ui/C/smc_session.ui, 2180 bytes, 5 tape blocks x ./usr/lib/sw/ui/C/smc_softinf.ui, 5653 bytes, 12 tape blocks x ./usr/lib/sw/ui/C/smc_softwar.ui, 18847 bytes, 37 tape blocks x ./usr/lib/sw/ui/C/smc_source.ui, 4902 bytes, 10 tape blocks x ./usr/lib/sw/ui/C/smc_targets.ui, 12190 bytes, 24 tape blocks x ./usr/lib/sw/ui/C/smc_task.ui, 5805 bytes, 12 tape blocks x ./usr/lib/sw/help/C/sduhelp.hv, 28436 bytes, 56 tape blocks x ./usr/lib/sw/help/C/sduhelp.hvk, 5145 bytes, 11 tape blocks x ./usr/lib/sw/help/C/sduhelp00.ht, 215428 bytes, 421 tape blocks x ./usr/lib/sw/help/C/sduhelp01.ht, 14210 bytes, 28 tape blocks x ./usr/lib/libcma.1, 462848 bytes, 904 tape blocks x ./usr/lib/libcma.2, 483328 bytes, 944 tape blocks x ./usr/lib/libcma.sl symbolic link to ./libcma.2 x ./usr/lib/libd4r.1, 45056 bytes, 88 tape blocks x ./usr/lib/libd4r.sl symbolic link to ./libd4r.1 x ./usr/lib/libdce.1, 4235264 bytes, 8272 tape blocks x ./usr/lib/libdce.2, 4292608 bytes, 8384 tape blocks x ./usr/lib/libdce.sl symbolic link to ./libdce.2 x ./usr/lib/libdcekt.1, 4427776 bytes, 8648 tape blocks x ./usr/lib/libsis.sl, 1044480 bytes, 2040 tape blocks x ./usr/lib/dld.sl, 155648 bytes, 304 tape blocks x ./usr/lib/libdc.sl, 45056 bytes, 88 tape blocks x ./usr/lib/libsmapi.2, 86016 bytes, 168 tape blocks x ./usr/sbin/devnm, 16384 bytes, 32 tape blocks x ./usr/sbin/diskinfo, 24576 bytes, 48 tape blocks x ./usr/sbin/insf symbolic link to /sbin/mksf x ./usr/sbin/ioinit symbolic link to /sbin/ioinit x ./usr/sbin/ioscan symbolic link to /sbin/ioscan x ./usr/sbin/mknod symbolic link to /sbin/mknod x ./usr/sbin/mount symbolic link to /sbin/mount x ./usr/sbin/reboot symbolic link to /sbin/reboot x ./usr/sbin/setboot, 20480 bytes, 40 tape blocks x ./usr/sbin/swapon, 28672 bytes, 56 tape blocks x ./usr/sbin/umount symbolic link to /sbin/umount x ./usr/sbin/chroot, 12288 bytes, 24 tape blocks x ./usr/sbin/rvxdump symbolic link to /usr/lbin/fs/vxfs/vxdump x ./usr/sbin/rvxrestore symbolic link to /usr/lbin/fs/vxfs/vxrestore x ./usr/sbin/vxdump symbolic link to /usr/lbin/fs/vxfs/vxdump x ./usr/sbin/vxrestore symbolic link to /usr/lbin/fs/vxfs/vxrestore x ./usr/sbin/mk_kernel, 27494 bytes, 54 tape blocks x ./usr/sbin/swagentd, 651264 bytes, 1272 tape blocks x ./usr/sbin/swacl, 2154496 bytes, 4208 tape blocks ./usr/sbin/swconfig linked to ./usr/sbin/swacl ./usr/sbin/swcopy linked to ./usr/sbin/swacl ./usr/sbin/swinstall linked to ./usr/sbin/swacl ./usr/sbin/swlist linked to ./usr/sbin/swacl x ./usr/sbin/swmodify, 1257472 bytes, 2456 tape blocks ./usr/sbin/swpackage linked to ./usr/sbin/swmodify ./usr/sbin/swreg linked to ./usr/sbin/swacl ./usr/sbin/swremove linked to ./usr/sbin/swacl ./usr/sbin/swverify linked to ./usr/sbin/swacl x ./usr/share/lib/terminfo/h/hp, 1448 bytes, 3 tape blocks x ./usr/share/lib/terminfo/v/vt100, 1358 bytes, 3 tape blocks x ./usr/share/lib/terminfo/w/wy60, 1673 bytes, 4 tape blocks x ./usr/conf/gen/templates/generic, 542 bytes, 2 tape blocks x ./usr/ccs/lbin/cpp, 290816 bytes, 568 tape blocks x ./usr/lbin/fs/vxfs/vxdump, 110592 bytes, 216 tape blocks x ./usr/lbin/fs/vxfs/vxrestore, 126976 bytes, 248 tape blocks x ./usr/lbin/sw/control_utils, 131332 bytes, 257 tape blocks x ./usr/lbin/swagent, 1536000 bytes, 3000 tape blocks x ./usr/lbin/sysadm/create_sysfile, 24576 bytes, 48 tape blocks x ./usr/lbin/sysadm/system_prep, 10000 bytes, 20 tape blocks x ./usr/obam/lbin/gethelp, 1236992 bytes, 2416 tape blocks x ./usr/obam/lbin/ui_exec, 12288 bytes, 24 tape blocks x ./usr/obam/lib/libIDMawrt.1, 1995529 bytes, 3898 tape blocks x ./usr/obam/lib/libIDMawrt.sl symbolic link to ./libIDMawrt.1 x ./usr/obam/lib/libobam.1, 1032192 bytes, 2016 tape blocks x ./usr/obam/lib/libobam.sl symbolic link to ./libobam.1 x ./usr/obam/lib/obam_aw.dmb, 149652 bytes, 293 tape blocks x ./usr/obam/lib/help/C/ui/ui.sdl, 81025 bytes, 159 tape blocks x ./usr/contrib/bin/gunzip, 90112 bytes, 176 tape blocks ./usr/contrib/bin/gzip linked to ./usr/contrib/bin/gunzip x ./sbin/awk, 397312 bytes, 776 tape blocks x ./sbin/cat, 208896 bytes, 408 tape blocks x ./sbin/chmod, 249856 bytes, 488 tape blocks x ./sbin/chown, 258048 bytes, 504 tape blocks x ./sbin/date, 241664 bytes, 472 tape blocks x ./sbin/frecover, 368640 bytes, 720 tape blocks x ./sbin/fs/cdfs/mount, 229376 bytes, 448 tape blocks x ./sbin/fs/cdfs/umount symbolic link to /sbin/fs/hfs/umount x ./sbin/fs/hfs/fsck, 339968 bytes, 664 tape blocks x ./sbin/fs/hfs/mount, 229376 bytes, 448 tape blocks x ./sbin/fs/hfs/umount, 192512 bytes, 376 tape blocks x ./sbin/fs/vxfs/fsck, 495616 bytes, 968 tape blocks x ./sbin/fs/vxfs/mount, 458752 bytes, 896 tape blocks x ./sbin/fs/vxfs/umount symbolic link to /sbin/fs/hfs/umount x ./sbin/fsck symbolic link to /sbin/fs_wrapper x ./sbin/init, 299008 bytes, 584 tape blocks x ./sbin/insf, 405504 bytes, 792 tape blocks x ./sbin/ioinit, 221184 bytes, 432 tape blocks x ./sbin/ioscan, 229376 bytes, 448 tape blocks x ./sbin/ls, 286720 bytes, 560 tape blocks x ./sbin/mkboot, 274432 bytes, 536 tape blocks x ./sbin/mkdir, 200704 bytes, 392 tape blocks x ./sbin/mknod, 192512 bytes, 376 tape blocks x ./sbin/mount, 274432 bytes, 536 tape blocks x ./sbin/mv, 241664 bytes, 472 tape blocks x ./sbin/reboot, 245760 bytes, 480 tape blocks x ./sbin/stty, 208896 bytes, 408 tape blocks x ./sbin/umount, 221184 bytes, 432 tape blocks x ./sbin/restore, 290816 bytes, 568 tape blocks x ./sbin/pax, 389120 bytes, 760 tape blocks x ./dev/config, 0 bytes, 0 blocks, character device x ./dev/null, 0 bytes, 0 blocks, character device x ./dev/console, 0 bytes, 0 blocks, character device x ./dev/kmem, 0 bytes, 0 blocks, character device x ./dev/mem, 0 bytes, 0 blocks, character device x ./dev/rroot, 0 bytes, 0 blocks, character device x ./dev/root, 0 bytes, 0 blocks, character device x ./dev/tty, 0 bytes, 0 blocks, character device x ./dev/syscon, 0 bytes, 0 blocks, character device x ./dev/systty, 0 bytes, 0 blocks, character device x ./tmp/set_locale, 3305 bytes, 7 tape blocks x ./var/adm/sw/security/_ACL, 40 bytes, 1 tape blocks x ./var/adm/sw/security/_OWNER, 62 bytes, 1 tape blocks x ./var/adm/sw/security/_PROD_DFLT_ACL, 55 bytes, 1 tape blocks x ./var/adm/sw/security/_SOC_DFLT_ACL, 55 bytes, 1 tape blocks x ./var/adm/sw/security/secrets, 15 bytes, 1 tape blocks x ./var/adm/sw/defaults, 1383 bytes, 3 tape blocks x ./var/opt/ignite/local/manifest/template.def, 14441 bytes, 29 tape blocks x ./opt/ignite/share/man/man1m.Z/print_manifest.1m, 1428 bytes, 3 tape blocks x ./opt/ignite/binpa/print_manifest, 57344 bytes, 112 tape blocks x ./opt/ignite/bin symbolic link to /opt/ignite/binpa x ./etc/group, 184 bytes, 1 tape blocks x ./etc/passwd, 332 bytes, 1 tape blocks x ./etc/magic, 8794 bytes, 18 tape blocks x ./etc/hosts, 486 bytes, 1 tape blocks x ./etc/services, 10908 bytes, 22 tape blocks x ./etc/inetsvcs.conf, 15 bytes, 1 tape blocks x ./etc/nsswitch.conf, 382 bytes, 1 tape blocks x ./configure3, 1507328 bytes, 2944 tape blocks x ./monitor_bpr, 1306624 bytes, 2552 tape blocks * Download_mini-system: Complete * Loading_software: Begin * Installing boot area on disk. * Enabling swap areas. * Backing up LVM configuration for "vg00". * Processing the archive source (HP-UX Core Operating System Archives). * Fri May 09 19:51:11 EDT 2008: Starting archive load of the source (English HP-UX 11.11 MC0 - 64 Bit OS). * Processed 10% of archive * Processed 20% of archive * Processed 30% of archive * Processed 40% of archive * Processed 50% of archive * Processed 60% of archive * Processed 70% of archive * Processed 80% of archive * Processed 90% of archive * Completed 100% of archive * Fri May 09 20:02:28 EDT 2008: Completed archive load of the source (English HP-UX 11.11 MC0 - 64 Bit OS). * Executing user specified script: "/opt/ignite/data/scripts/os_arch_post_l". * Running the ioinit command ("/sbin/ioinit -c") * Creating device files via the insf command. insf: Installing special files for sdisk instance 0 address 0/0/3/0.0.0.0 insf: Installing special files for sdisk instance 1 address 0/1/1/0.1.0 insf: Installing special files for sdisk instance 2 address 0/1/1/1.0.0 insf: Installing special files for sdisk instance 3 address 0/1/1/1.9.0 insf: Installing special files for sdisk instance 4 address 0/1/1/1.11.0 insf: Installing special files for sdisk instance 5 address 0/1/1/1.13.0 insf: Installing special files for sdisk instance 6 address 0/1/1/1.15.0 insf: Installing special files for pseudo driver dlpi insf: Installing special files for pseudo driver kepd insf: Installing special files for pseudo driver framebuf insf: Installing special files for pseudo driver sad * Running "/opt/upgrade/bin/tlinstall -v" and correcting transition link permissions. * Creating the system file. Creating your system file in the file /tmp/ign_configure/tstand.system * Constructing the bootconf file. * Setting primary boot path to "0/1/1/1.0.0". * Executing: "/var/adm/sw/products/OS-Core/CORE-KRN/iux_postload". * Executing: "/var/adm/sw/products/OS-Core/CORE-SHLIBS/iux_postload". * Running: /var/adm/sw/products/OS-Core/CORE-SHLIBS/postinstall NOTE: /usr/bin/libc.2 has been replaced with a version specifically made for PA2.0 computers. The library can be changed back by executing libcadmin(1m). * Executing: "/var/adm/sw/products/PHSS_25983/pfiles/iux_postload". NOTE: tlinstall is searching filesystem - please be patient NOTE: Successfully completed * Loading_software: Complete ======= 05/09/08 20:03:57 EDT Building the new kernel. * Build_Kernel: Begin * Tuned kernel for large swap space: "maxswapchunks 1024". * Building a new kernel using the command: "/usr/sbin/mk_kernel -o /stand/vmunix". WARNING: No such device, tunable, or cdio ehci. Ignoring the following line. ehci WARNING: No such device, tunable, or cdio side_ba. Ignoring the following line. side_ba Generating module: krm... Compiling /stand/build/conf.c... Loading the kernel... Generating kernel symbol table... * Build_Kernel: Complete * Boot_From_Client_Disk: Begin ======= 05/09/08 20:04:25 EDT Rebooting machine as expected. NOTE: Rebooting system. sync'ing disks (0 buffers to flush): 0 buffers not flushed 0 buffers still dirty Closing open logical volumes... Done
Automatically rebuild the DSF
In the second reboot, the server will recreate the device special files. The banner "OK" will indicate that the process suceeded and the server will reboot one last time. After this reboot, the system will be up and running.
Firmware Version 45.44 Duplex Console IO Dependent Code (IODC) revision 1 Firmware Version 45.44 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2004, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 800 MHz Active Functional 67108864 67108864 1 800 MHz Idle Functional 67108864 67108864 Central Bus Speed (in MHz) : 200 Available Memory : 2097152 KB Good Memory Required : Not initialized. Defaults to 32 MB. Primary boot path: 0/1/1/1.0 Alternate boot path: 0/1/1/1.13 Console path: 0/0/1/1.0 Keyboard path: 0/0/4/0.0 Processor is booting from the first available device. To discontinue, press any key within 10 seconds. 10 seconds expired. Proceeding... Trying Primary Boot Path ------------------------ Booting... Boot IO Dependent Code (IODC) revision 3 HARD Booted. ISL Revision A.00.43 Apr 12, 2000 ISL booting hpux Boot : disk(0/1/1/1.0.0.0.0.0.0;0)/stand/vmunix 11587584 + 2310144 + 1550920 start 0x200a68 alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3f900000. gate64: sysvec_vaddr = 0xc0002000 for 2 pages NOTICE: autofs_link(): File system was registered at index 3. NOTICE: cachefs_link(): File system was registered at index 5. NOTICE: nfs3_link(): File system was registered at index 6. probe: port 1 overcurrent 0x0 probe: port 2 overcurrent 0x0 probe: port 3 overcurrent 0x0 probe: port 1 overcurrent 0x0 probe: port 2 overcurrent 0x0 System Console is on the Built-In Serial Interface iether0: INITIALIZING HP AB352-60001 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/1/2/0 iether1: INITIALIZING HP AB352-60001 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/1/2/1 igelan2: INITIALIZING HP A9784-60002 PCI/PCI-X 1000Base-T FC/GigE Combo Adapter at hardware path 0/4/1/0/6/0 Entering cifs_init... Initialization finished successfully... slot is 9 Logical volume 64, 0x3 configured as ROOT Logical volume 64, 0x2 configured as SWAP Logical volume 64, 0x2 configured as DUMP Swap device table: (start & size given in 512-byte blocks) entry 0 - major is 64, minor is 0x2; start = 0, size = 4194304 Starting the STREAMS daemons-phase 1 Checking root file system. /dev/root: No such device Root check done. Create STCP device files Starting the STREAMS daemons-phase 2 $Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $ Memory Information: physical page size = 4096 bytes, logical page size = 4096 bytes Physical: 2095104 Kbytes, lockable: 1472784 Kbytes, available: 1698864 Kbytes Volume group "/dev/vg00" has been successfully changed. Resynchronized volume group /dev/vg00 * Running the ioinit command ("/sbin/ioinit -c") * Creating device files via the insf command. insf: Installing special files for asio0 instance 0 address 0/0/1/0 insf: Installing special files for asio0 instance 1 address 0/0/1/1 insf: Installing special files for hub instance 0 address 0/0/2/0.1 insf: Installing special files for hub instance 1 address 0/0/2/1.1 insf: Installing special files for sdisk instance 0 address 0/0/3/0.0.0.0 insf: Installing special files for sctl instance 0 address 0/0/3/0.0.7.0 insf: Installing special files for sctl instance 1 address 0/0/3/0.1.7.0 insf: Installing special files for sdisk instance 1 address 0/1/1/0.1.0 insf: Installing special files for sctl instance 2 address 0/1/1/0.7.0 insf: Installing special files for sdisk instance 2 address 0/1/1/1.0.0 insf: Installing special files for sctl instance 3 address 0/1/1/1.7.0 insf: Installing special files for sdisk instance 3 address 0/1/1/1.9.0 insf: Installing special files for sdisk instance 4 address 0/1/1/1.11.0 insf: Installing special files for sdisk instance 5 address 0/1/1/1.13.0 insf: Installing special files for sdisk instance 6 address 0/1/1/1.15.0 insf: Installing special files for ipmi instance 0 address 16 insf: Installing special files for pseudo driver cn insf: Installing special files for pseudo driver mm insf: Installing special files for pseudo driver devkrs insf: Installing special files for pseudo driver ptym insf: Installing special files for pseudo driver ptys insf: Installing special files for pseudo driver ip insf: Installing special files for pseudo driver arp insf: Installing special files for pseudo driver rawip insf: Installing special files for pseudo driver tcp insf: Installing special files for pseudo driver udp insf: Installing special files for pseudo driver stcpmap insf: Installing special files for pseudo driver nuls insf: Installing special files for pseudo driver netqa insf: Installing special files for pseudo driver dmem insf: Installing special files for pseudo driver diag0 insf: Installing special files for pseudo driver telm insf: Installing special files for pseudo driver tels insf: Installing special files for pseudo driver tlclts insf: Installing special files for pseudo driver tlcots insf: Installing special files for pseudo driver iomem insf: Installing special files for pseudo driver tlcotsod insf: Installing special files for pseudo driver dmp insf: Installing special files for pseudo driver vols insf: Installing special files for pseudo driver dev_config insf: Installing special files for pseudo driver strlog insf: Installing special files for pseudo driver sad insf: Installing special files for pseudo driver echo insf: Installing special files for pseudo driver dlpi insf: Installing special files for pseudo driver ptm insf: Installing special files for pseudo driver pts insf: Installing special files for pseudo driver beep insf: Installing special files for pseudo driver framebuf insf: Installing special files for pseudo driver diag1 insf: Installing special files for pseudo driver klog insf: Installing special files for pseudo driver sy insf: Installing special files for pseudo driver kepd insf: Installing special files for pseudo driver diag2 insf: Installing special files for pseudo driver root * Bringing up Network (lan0) add net default: gateway 16.90.48.1 * NFS mounting clients directory. * Boot_From_Client_Disk: Complete * Run_SD_Configure_Scripts: Begin * Run_SD_Configure_Scripts: Complete * Run_Postconfigure_Scripts: Begin * Applying the networking information. * Running scripts from /sbin/ch_hostname.d * Creating the manifest. NOTE: Could not read the /etc/resolv.conf file. * Run all specified post-configure scripts. * Executing: "/var/adm/sw/products/EMS-KRMonitor/KRMON-RUN/iux_postconfig". * Executing user specified script: "/opt/ignite/data/scripts/os_arch_post_c". * Run_Postconfigure_Scripts: Complete ======= 05/09/08 19:08:25 CDT Installation complete: Successful ##### ###### # ##### ## # # # # # # # # # ##### # # # # # # # # # ###### # # # # # # # ##### ###### ###### # # # ####### # # # # # # # # # # # # ### # # # # # # # # ####### # # NOTE: Rebooting system. sync'ing disks (0 buffers to flush): 0 buffers not flushed 0 buffers still dirty Closing open logical volumes... Done
Booting in Multiuser Mode
Firmware Version 45.44 Duplex Console IO Dependent Code (IODC) revision 1 Firmware Version 45.44 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2004, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 800 MHz Active Functional 67108864 67108864 1 800 MHz Idle Functional 67108864 67108864 Central Bus Speed (in MHz) : 200 Available Memory : 2097152 KB Good Memory Required : Not initialized. Defaults to 32 MB. Primary boot path: 0/1/1/1.0 Alternate boot path: 0/1/1/1.13 Console path: 0/0/1/1.0 Keyboard path: 0/0/4/0.0 Processor is booting from the first available device. To discontinue, press any key within 10 seconds. 10 seconds expired. Proceeding... Trying Primary Boot Path ------------------------ Booting... Boot IO Dependent Code (IODC) revision 3 HARD Booted. ISL Revision A.00.43 Apr 12, 2000 ISL booting hpux Boot : disk(0/1/1/1.0.0.0.0.0.0;0)/stand/vmunix 11587584 + 2310144 + 1550920 start 0x200a68 alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3f900000. gate64: sysvec_vaddr = 0xc0002000 for 2 pages NOTICE: autofs_link(): File system was registered at index 3. NOTICE: cachefs_link(): File system was registered at index 5. NOTICE: nfs3_link(): File system was registered at index 6. probe: port 1 overcurrent 0x0 probe: port 2 overcurrent 0x0 probe: port 3 overcurrent 0x0 probe: port 1 overcurrent 0x0 probe: port 2 overcurrent 0x0 System Console is on the Built-In Serial Interface iether0: INITIALIZING HP AB352-60001 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/1/2/0 iether1: INITIALIZING HP AB352-60001 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/1/2/1 igelan2: INITIALIZING HP A9784-60002 PCI/PCI-X 1000Base-T FC/GigE Combo Adapter at hardware path 0/4/1/0/6/0 Entering cifs_init... Initialization finished successfully... slot is 9 Logical volume 64, 0x3 configured as ROOT Logical volume 64, 0x2 configured as SWAP Logical volume 64, 0x2 configured as DUMP Swap device table: (start & size given in 512-byte blocks) entry 0 - major is 64, minor is 0x2; start = 0, size = 4194304 Starting the STREAMS daemons-phase 1 Checking root file system. file system is clean - log replay is not required Root check done. Create STCP device files Starting the STREAMS daemons-phase 2 $Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $ Memory Information: physical page size = 4096 bytes, logical page size = 4096 bytes Physical: 2095104 Kbytes, lockable: 1472784 Kbytes, available: 1698864 Kbytes /sbin/ioinitrc: insf: Installing special files for ipmi instance 0 address 16 insf: Installing special files for pseudo driver framebuf /sbin/krs_sysinit: /sbin/bcheckrc: Checking for LVM volume groups and Activating (if any exist) Volume group "/dev/vg00" has been successfully changed. Resynchronized volume group /dev/vg00 vxfs fsck: sanity check: root file system OK (mounted read/write) Checking hfs file systems /sbin/fsclean: /dev/vg00/lvol1 (mounted) ok HFS file systems are OK, not running fsck Checking vxfs file systems /dev/vg00/lvol8 : vxfs fsck: sanity check: /dev/vg00/lvol8 OK /dev/vg00/lvol3 : vxfs fsck: sanity check: root file system OK (mounted read/write) /dev/vg00/lvol4 : vxfs fsck: sanity check: /dev/vg00/lvol4 OK /dev/vg00/lvol5 : vxfs fsck: sanity check: /dev/vg00/lvol5 OK /dev/vg00/lvol6 : vxfs fsck: sanity check: /dev/vg00/lvol6 OK /dev/vg00/lvol7 : vxfs fsck: sanity check: /dev/vg00/lvol7 OK Cleaning /etc/ptmp... (c)Copyright 1983-2000 Hewlett-Packard Co., All Rights Reserved. (c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California (c)Copyright 1980, 1984, 1986 Novell, Inc. (c)Copyright 1986-1992 Sun Microsystems, Inc. (c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology (c)Copyright 1989-1993 The Open Software Foundation, Inc. (c)Copyright 1986 Digital Equipment Corp. (c)Copyright 1990 Motorola, Inc. (c)Copyright 1990, 1991, 1992 Cornell University (c)Copyright 1989-1991 The University of Maryland (c)Copyright 1988 Carnegie Mellon University (c)Copyright 1991-2000 Mentat Inc. (c)Copyright 1996 Morning Star Technologies, Inc. (c)Copyright 1996 Progressive Systems, Inc. (c)Copyright 1991-2000 Isogon Corporation, All Rights Reserved. RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause in DFARS 252.227-7013. Hewlett-Packard Company 3000 Hanover Street Palo Alto, CA 94304 U.S.A. Rights for non-DOD U.S. Government Departments and Agencies are as set forth in FAR 52.227-19(c)(1,2). /sbin/auto_parms: DHCP access is disabled (see /etc/auto_parms.log) HP-UX Start-up in progress __________________________ Configure system crash dumps ........................................ OK Removing old vxvm files ............................................. OK VxVM device node check .............................................. OK VxVM general startup ................................................ OK VxVM reconfiguration recovery ....................................... OK Mount file systems .................................................. OK Update kernel and loadable modules .................................. N/A Initialize loadable modules ......................................... OK Setting hostname .................................................... OK Start Kernel Logging facility ....................................... N/A Set privilege group ................................................. N/A Display date ........................................................ N/A Copy processor logs to /var/tombstones .............................. OK Save system crash dump if needed .................................... N/A Start evp ........................................................... OK Enable auxiliary swap space ......................................... OK Start syncer daemon ................................................. OK Configure Loopback interfaces (lo0) ................................. OK VxVM volume recovery start .......................................... OK Configuring all unconfigured software filesets ...................... OK Recover editor crash files .......................................... OK Clean UUCP .......................................................... OK List and/or clear temporary files ................................... OK Clean up old log files .............................................. OK Start system message logging daemon ................................. OK Start pty allocator daemon .......................................... OK Configuring OLA/R interface ......................................... OK Start network tracing and logging daemon ............................ OK Configure HP igelan Gigabit Ethernet interfaces ..................... OK Configure HP iether Gigabit Ethernet interfaces ..................... OK Configure HP Gigabit Ethernet interfaces ............................ OK Configure HP Ethernet interfaces .................................... OK Create PCI FDDI device files. ....................................... OK Configure HP 100BASE-T interfaces ................................... N/A Configure VLAN interfaces ........................................... OK Configure LAN interfaces ............................................ OK Start name server daemon ............................................ N/A Starting HP-UX Secure Shell ......................................... OK Start NFS core subsystem ............................................ OK Start NIS+ server subsystem ......................................... OK Start NIS+ client subsystem ......................................... OK Start NIS server subsystem .......................................... OK Start ldap client daemon ............................................ N/A Start NIS/LDAP server subsystem ..................................... N/A Start NIS client subsystem .......................................... OK Start NFS client subsystem .......................................... OK Start the Trusted Mode with NIS+ subsystem .......................... N/A Configure pseudo devices for MAC/LLA access ......................... OK Start multicast routing daemon ...................................... N/A Start Internet services daemon ...................................... OK Start dynamic routing daemon ........................................ N/A Start router discover protocol daemon ............................... N/A Configuring PPP Interface ........................................... OK Start RARP protocol daemon .......................................... N/A Start remote system status daemon ................................... N/A Configuring man pages for Internet Services ......................... OK Starting mail daemon ................................................ OK Starting outbound connection daemons for DDFA software .............. N/A Start SNMP Master Network Management daemon ......................... OK Start OSPF MIB Network Management subAgent .......................... N/A Start SNMP HP-UNIX Network Management subAgent ...................... OK Start SNMP MIB-2 Network Management subAgent ........................ OK Start SNMP Trap Dest Network Management subAgent .................... OK Start HA cluster SNMP subagent ...................................... OK Start DCE daemons ................................................... N/A Start SNMP PCI FDDI Network Management subAgent ..................... OK Start RPC daemon if needed .......................................... OK Start CIM cimserver subsystem ....................................... OK Start Isogon License Server Daemon .................................. N/A Initialize Instant Capacity ......................................... N/A Starting ISEE hpservices mad daemon. ................................ N/A Start Runner ........................................................ N/A Start remote boot daemon ............................................ N/A Starting X Font Server at TCP port 7000 ............................. N/A Start vt daemon ..................................................... OK Starting UDC server ................................................. N/A Start time synchronization .......................................... N/A Start accounting .................................................... N/A Install/Load XF86 DLKM Helper Modules ............................... OK Starting the password/group assist subsystem ........................ OK Starting HP Disk Array Manager daemons. ............................. OK Starting disk array monitor daemons. ................................ OK Start print spooler ................................................. N/A Starting HP Distributed Print Service ............................... OK Start clock daemon .................................................. OK Start diagnostic subsystem .......................................... OK Start environment monitoring daemon ................................. OK Start auditing subsystem ............................................ N/A Start audio server daemon ........................................... N/A Start Distributed Single Logical Screen daemon ...................... N/A Start USB hub daemon ................................................ OK SAM System administration configuration ............................. OK OVPA performance software is being started. ......................... OK Starting evweb PostgreSQL daemons ................................... OK Configure PRM -or- Configure and Enable PRM ......................... N/A Start Workload Manager subsystem .................................... N/A Starting ObAM Application Server .................................... N/A Initialize Software Distributor agent daemon ........................ OK Starting the System Management HomePage server ...................... OK Starting the gWLM Agent ............................................. N/A Starting CIFS Client ................................................ N/A Configure HP RAID SA interfaces ..................................... N/A Copy processor logs to /var/tombstones .............................. OK Starting Event Monitoring Service ................................... OK Start EMS SNMP subagent ............................................. OK Configure HP Fibre Channel Mass Storage interfaces .................. OK Configure HP Internal RAID interfaces ............................... N/A Configuring Ultra320 SCSI Mass Storage interfaces ................... OK Starting the Winbind Daemon ......................................... N/A Starting the RST EMS listener ....................................... N/A Configure HP Fibre Channel Tachyon TL/TS Mass Storage interfaces .... OK Configuring HP Fibre Channel FCD Mass Storage interfaces ............ OK VVR - Starting Communication Daemon ................................. N/A VVR - Starting VRAS daemon .......................................... N/A VVR - Starting VxRSync daemon ....................................... N/A Starting VERITAS Enterprise Administrator Service (vxsvc) ........... OK Start NFS server subsystem .......................................... OK Start X print server(s) ............................................. N/A Start Highly Available cluster ...................................... N/A Starting HP-UX Apache-based Web Server .............................. OK Starting HP-UX Tomcat-based Servlet Engine .......................... N/A Starting HP-UX Webmin-based Admin ................................... OK Starting the HPUX Webproxy subsystem ................................ N/A Starting HP-UX XML Web Server Tools ................................. OK Starting OVTrcSrv... ................................................ OK Starting OVCtrl... .................................................. OK Start CDE login server .............................................. OK Start MySQL Server .................................................. OK Starting PRNGD (Pseudo Random Number Generator Daemon) .............. OK The system is ready. GenericSysName [HP Release B.11.11] (see /etc/issue) Console Login: